What a LightKarrier is?

LightKarrier is a solution to add light points without the need for drilling. It integrates seamlessly with your van by replacing the factory handles.

What improvements does it offer?

• The 3500k LED panel provides a warm, pleasant and diffused light that does not strain the eyes.
• It does not require switches, the light turns on by pressing the metal edge of the panel and turns off by pressing it again.
• It is Dimmable: the light can be adjusted by holding the button down until the desired brightness is achieved. To adjust it again, release the button and hold it down again.
• It features slots for hanging an air freshener.

With this solution, there is no need to drill the van's ceiling or paneling. Therefore, it is ideal for vans with a basic and removable camper setup that wants to maintain the original aesthetics, as well as for fully equipped vans.

How is it attached?

It is attached using the factory anchor points of the handles. It is very common for these to become unused, especially the ones in the center seats when the second-row seats are removed, so we can use them to install the lights.

How does it work?

Since it does not require a switch, we only need to extend the two cables coming out of the LED panel and connect them to a positive and negative source (usually to the fuse box of our second battery), although this will depend on each installation.

By removing the original handles, you will find two holes to anchor the screws and a third one (on the right side) where a guide support passes through. This is where we will pass the cables and bring them to our connection points.

What tools do I need to install it?

• Torx T-25
• Heat-shrink tubing
• Cable

How is it made?

It is made of 3mm thick aluminum and powder coated in satin black.

Which vans is it suitable for?

Due to the way it is anchored to the ceiling, LightKarrier can be installed in Volkswagen Caravelle and Multivan T5, T6 and T6.1 vans.