CB Antenna Mount for VW Crafter & MAN TGE

CB Antenna Mount for VW Crafter & MAN TGE

The Antenna Mount carries your CB antenna on the bonnet of your VW Crafter or MAN TGE. It is laser-cut from 4 mm stainless steel, bolts to the factory bonnet screws and does not wobble, on tarmac or on a rough trail.

Check the mountBFREE Antenna Mount installed on the bonnet of a van while off-roading

Why mount a CB radio antenna this way?

A CB radio in a Crafter or MAN TGE usually means finding somewhere to put the antenna without cutting into the van. The Antenna Mount solves that. The antenna sits on the bonnet using the factory bonnet screws.

It is made for overland and off-road use, where the antenna needs to survive trails. The Antenna Mount shares its base design with our Bonnet light mount bracket (PODKarrier), which is already fitted on many vans. Rock solid and wobble-free, which is why many customers have swapped out their old setups from other brands for this one.

The mount

BFREE Antenna Mount for VW Crafter and MAN TGE holding a CB antenna on the bonnet
Antenna

Antenna Mount for VW Crafter & MAN TGE

Holds your CB antenna on the bonnet.

  • Uses the factory bonnet screws, no drilling
  • Slots for routing the antenna cable
  • Sold per side: driver or passenger
View Antenna Mount
Important to know
  • The antenna is not included. The Antenna Mount takes a standard antenna base with a 19 mm hole. There is about 2 to 3.5 cm of space under the bracket for the base.
  • The Antenna Mount is sold per side, driver or passenger. Pick the side you want the antenna on.

Frequently asked questions

Can I mount a CB antenna on a VW Crafter or MAN TGE without drilling the body?

Yes. The Antenna Mount bolts to the bonnet with the factory bonnet screws, so nothing is drilled into the body.

Where does the CB antenna go on a VW Crafter or MAN TGE?

On the bonnet. The Antenna Mount has a 19 mm pre-drilled hole for the antenna base and slots to route the cable with zip ties. Slotted mounting holes let you adjust the position slightly.

Which vans does the Antenna Mount fit?

It is designed for the Volkswagen Crafter and the MAN TGE.

Which antenna base fits the Antenna Mount?

Any standard base that works with a 19 mm hole and about 2 to 3.5 cm of clearance under the bracket. Some customers use the Sirio HP-AC/U PL base, which has enough clearance.

Where is it made and how fast does it ship?

Everything is made in Spain. EU shipping usually takes 3 to 5 days. We also ship to Norway, Switzerland and the UK.